By: Tanya Rouce
A key component of Artesian Water Co.’s commitment to providing a reliable source of quality water to its customers was system integration connecting two sides of the Chesapeake & Delaware Canal.
According to officials at Artesian, it was a complex process requiring detailed evaluation and assessment of materials and resources—and they chose high-density polyethylene (HDPE) pressure-application water pipe.
The Chesapeake & Delaware Canal is 14 mi long, 450 ft wide and 35 ft deep. It runs across Maryland and Delaware, joining the Delaware River with the Chesapeake Bay and the Port of Baltimore. Artesian has more than 70,000 metered customers, providing water service to about 231,000 residents, approximately 28% of Delaware’s total population. Artesian’s ability to successfully navigate the C&D Canal with 5,000 ft of 24-in. HDPE pipe enabled it to integrate previously separated portions of its supply system.
The 5,000 ft of HDPE pipe was installed with two 2,500-ft directional drills. The proactive project was implemented to maintain water supply reliability and connected Artesian’s northern New Castle County system to their southern New Castle County system, adding redundancy to its potable water and fire protection service capacity. It also significantly improved the hydraulics of Artesian’s overall system.
Working on a tight timeline, contractors finished the work between January and June 2004. It is the largest such project completed by Artesian Water to date.
“Our standard water pipe material for crossing large bodies of water or for use in corrosive soils is HDPE,” said Adam Gould, project manager for the C&D Canal job. “This was the biggest project of its kind we’ve done, and because of its flexibility, HDPE was the only pipe we would have used to do it.”
Added challenges
Contractors faced the added challenge of a 150-ft drop in elevation from the water main on land to a depth of 50 ft below the canal bottom. Larry Anderson of Spring & Associates said a 50 to 70 ft drop is normal.
Camille Rubeiz, director of engineering for the Plastics Pipe Institute, said polyethylene is the only commonly used pipe material that is truly flexible.
“Most of the polyethylene pipe manufacturers give a rule of thumb that their products can be curved to a radius approximately 25 times the diameter of the pipe,” Rubeiz said. “This can be a real advantage when installing water pipe in an application like a major waterway.
“It’s the combination of flexibility and leak-free joints that allows for unique and cost-effective types of installation methods that the rigid PVC and ductile iron pipes can’t use with bell-and-spigot connections,” Rubeiz added. “Installation methods like horizontal directional drilling, pipe bursting, sliplining, plow and plant, submerged or floating pipe can save considerable time and money in most potable water applications.”
CDM, Inc. was responsible for charting the pipe’s course with design drawings and working with the owner of the canal, the U.S. Army Corps of Engineers, on the proper permits. CDM’s engineers, Artesian project managers and the Army Corps worked together to finish the project ahead of deadline.
“The directional drilling with HDPE pipe is conducive to minimizing disturbances during the project,” said Bill Cesanek, AICP, vice-president for CDM.
About The Author: Tanya Rouce is the marketing communications manager for the Plastics Pipe Institute. She can be reached at 202/462-9607, ext. 13 or by e-mail at [email protected].
